Laser Engraver: 60W Epilog Helix (24″ x 18″ engraving area, 8.5 max mat’l thickness). Computer with CorelDRAW installed: Dell Optiplex 390. Monitor: Samsung SyncMaster 2333. Ventilation Blower: Penn State Industries DC-3XL, 1.5 HP. Multi Switch Relay (for remotely turning on the ventilation blower). Associated tubing and pressure gauges for compressed air. Manual and cleaning solution. This system should be a plug-and-play installation. The only component you’re missing is an air pressure line! As you can see from the photos, the laser engraver/cutter is in phenomenal shape. It has only been used for small, one-off prototypes. I worked at this particular startup for the past 2 1/2 years, and the laser cutter was used less than 1 hour per month. I can say with confidence that the machine has seen less than 50 hours of work. The engraver comes with two types of trays: a’honeycomb’ tray and a’solid’ tray. Another tray, situated below the main tray catches fallen material. The machine is very clean. There are signs of use on the honeycomb tray. I begin a master’s program in robotics later this month. It pains me to sell such an amazing piece of equipment, but I hope it will find a happy home. I will be moving across the country soon, and have no choice but to offload this quickly. 24″ x 18″ (610 x 457 mm). 8.5 (216 mm). Maximum Material Thickness with Table Removed. 23.5″ x 17″ (597 x 432 mm) engraving area. State-of-the-art, digitally controlled, air-cooled CO2 laser tubes are fully modular, permanently aligned and field replaceable. Store unlimited files up to 64 MB. Rolling buffer allows files of any size to be engraved. Permanent Job Save at the Laser. Store up to 10 jobs at the laser, each up to 2 MB in size. Attach an air compressor to our included Air Assist to remove heat and combustible gasses from the cutting surface by directing a constant stream of compressed air across the cutting surface. (INCLUDED WITH THIS UNIT). The Laser DashboardT controls your Epilog Laser’s settings from a wide range of software packages – from design programs to spreadsheet applications to CAD drawing packages. Since the laser beam is invisible, the Red Dot Pointer on Epilog’s Laser Systems allows you to have a visual reference for locating where the laser will fire. When engraving items that are not easily placed at the top corner of the laser, you can set a new home position by hand with the convenient Moveable Home Position feature on the Legend Series Lasers. Optimized raster, vector or combined modes with engraving and cutting in one job. High-speed, continuous-loop, DC servomotors using linear and rotary encoder technology for precise positioning. Ground and polished stainless steel NeverWear Bearing System. Advanced B-style Kevlar Belts. User controlled from 75 to 1200 dpi. Speed and Power Control. Computer or manually control speed and power in 1% increments to 100%. Vector color mapping links speed, power and focus to any RGB color. 10 Base-T Ethernet or USB Connection. Compatible with Windows® XP/Vista/7. Size (W x D x H). 36.5″ x 32″ x 39.8. (927 x 813 x 1011 mm). Auto-switching power supply accommodates 110 to 240 volts, 50 or 60 Hz, single phase, 15 amp AC. Super-SilentT Cooling Fans Normal Sound Level. External exhaust or internal filtration system is required. There is one output port, 4 in diameter. Class 2 Laser Product – 1 mW CW Maximum 600-700 nm. The item “Epilog Laser Engraver Cutter, Helix Model, 60 WATTS, Legend Series, Barely Used” is in sale since Wednesday, August 12, 2015. This item is in the category “Business & Industrial\MRO & Industrial Supply\Lighting & Lasers\Industrial Lasers”. The seller is “jenki_merri” and is located in San Francisco, California. This item can be shipped to United States.
- Brand: EPILOG
- Model: Helix
- MPN: Helix
- Country/Region of Manufacture: United States