Epilog FiberMark Fusion 50W Laser System

Epilog FiberMark Fusion 50W Laser System Epilog FiberMark Fusion 50W Laser System
Epilog FiberMark Fusion 50W Laser System
Epilog FiberMark Fusion 50W Laser System
Epilog FiberMark Fusion 50W Laser System
Epilog FiberMark Fusion 50W Laser System 100% operational, no issues, and approximately 2200 hours in use We are business liquidators. We are not the original purchasers, owners, or operators of this equipment. These items are used, do not assume they will be in brand new mint condition, they will show normal use and wear which means minor scratches, scuffs, or blemishes and maybe dusty from storage, etc. Before advertising it, I spoke to the former maintenance person for this machine. It’s basically in like new condition without any defects, damage. Engraving Area: 32″ x 20″ (812 x 508 mm) Focal Length (F-Theta Lens): 5″ (127 mm) Maximum Material Thickness: 11.25″ (285 mm) Laser Wattage: 50 watts Laser Type: Solid State Pulsed Ytterbium Fiber Laser (air cooled). Mode of Operation: Pulsed 20-80 kHZ. Repetition Rate (Frequency): 20 kHZ – 100 kHz depending on the laser wattage. Intelligent Memory Capacity: Multiple file storage up to 128 MB. Air Assist: Attach an air compressor to our Air Assist to remove heat and combustible gases from the cutting surface by directing a constant stream of compressed air across the marking surface. Laser Dashboard: The Laser Dashboard controls your Epilog Laser’s settings from a wide range of software packages – from design programs to spreadsheet applications to CAD drawing packages. Red Dot Pointer: Since the laser beam is invisible, the Red Dot Pointer on Epilog’s FiberMark Laser allows you to have a visual reference for locating where the laser will fire. Relocatable Home: When engraving items that are not easily placed at the top corner of the laser, you can set a new home position by hand (FM 24) or joystick (FM Fusion) with the convenient Movable Home Position features on the FiberMark Laser. Operating Modes: Raster, vector or combined modes. Motion Control System: High-speed, continuous-loop, DC servomotors using linear and rotary encoding technology for precise positioning. X-Axis Bearings: Ground and polished stainless steel long-lasting bearing system. Self lubricating on the FiberMark Fusion Belts: Double-wide Kevlar (x-axis) and Steel Cord (y-axis) belts. Resolution: User controlled from 75 to 1200 dpi Speed and Power Control: Computer or manually control speed and power in 1% increments to 100%. Raster and vector color mapping links speed, power and focus to any RGB color. Print Interface: 10 Base-T Ethernet or USB connection. Compatible with Windows XP/Vista/7/8. Size (W x D x H): 52.5″ x 33.5″ x 40.75 (1334 x 851 x 1035 mm) Weight: 500 lbs (227 kg) Electrical Requirements: Auto-switching power supply accommodates 110 to 240 volts, 50 or 60 Hz, single phase, 15 amp AC. Maximum Table Weight: 200 lbs (90 kg) for static and 100 lbs (46 kg) for lifting. Ventilation System: External exhaust or internal filtration system is required via two 4 (101.6 mm) output ports. We are in San Diego CA 92104 and I’m open to delivering within a couple hours of our office. The item “Epilog FiberMark Fusion 50W Laser System” is in sale since Thursday, October 08, 2015. This item is in the category “Business & Industrial\Printing & Graphic Arts\Screen & Specialty Printing\Engraving”. The seller is “sirvader68″ and is located in San Diego, California. This item can be shipped worldwide.
Epilog FiberMark Fusion 50W Laser System